2.5 ton Hand Pallet Jack

Send Inquiry

Product Description

2.5 ton Hand Pallet Jack The handling operation is completed by human pulling. When the manual pallet truck is in use, the fork carried by it is inserted into the pallet hole, and driven by the hydraulic system, the pallet cargo can be lifted and lowered.

Product Detail

2.5 ton Hand Pallet Jack This product is characterized by rapid lifting, two pressure range forks can touch the bottom of the pallet, which saves half the time compared with the standard type. Ergonomically designed plastic handle, comfortable and labor-saving. It is a unique overall stamping and forming beetle fork, which not only has 25% higher strength than ordinary forks, but also has a more beautiful appearance.

Product Specification

Capacity	Minimum height (mm)	Max lift height (mm)	Length(mm)	Width(mm)	Wheel type	Load wheel size(mm)	Steer wheel size(mm)
2	80	200	1150	550	Rubber/PU/Nylon	70*80	180*50
2	80	200	1220	685	Rubber/PU/Nylon	70*80	180*50
2.5	80	200	1150	550	Rubber/PU/Nylon	70*80	180*50
2.5	80	200	1220	685	Rubber/PU/Nylon	70*80	180*50
3	80	200	1150	550	Rubber/PU/Nylon	70*80	180*50
3	80	200	1220	685	Rubber/PU/Nylon	70*80	180*50
5	80	200	1220	685	Rubber/PU/Nylon	70*80	180*50

Product Feature And Application

Standard manual hydraulic pallet truck
·2.5 ton Hand Pallet Jack Using Baosteel's high-quality 4mm steel plate, reliable welding strength without breaking point
·Integral cast oil cylinder, the lowering speed of the oil cylinder is not affected by the load
·Imported sealing ring, chrome-plated piston rod
·Internal relief valve provides overload protection, effectively reducing maintenance costs
·The rotating shaft connection adopts high-quality radial roller bearings, which is flexible and does not shake
One-piece cast wheel frame and equipped with front and rear guide wheels to protect the matched wheels from impact and extend the life of the wheels
Conical arc fork design, fast and easy to enter and exit the pallet
2.5 ton Hand Pallet Jack The moving part is equipped with a wear-resistant guide ring, which absorbs the partial load and prolongs the service life
The handle fork is equipped with rubber pads, which greatly extends the service life

Product Details

For the forksize , there are 550*1150mm and 685*1220mm for your choice , but we also can customize the fork size for you , so , if you have any special request, please feel freely to contact us .we will try our best to meet your requirement .

And here ,please check the weddig technology ,for the welding machine weld , the welding seam leveling increase the product carrying capacity and make its out look more beautiful.

Rocker arm widened and thickened,when compared, you will see the different directly

After painting,the steel plate thickness can be 4mm,it’s strong and durable. While others may be 3.75mm even 3.5mm.

The pallet truck have 4 fork stiffeners at the bottom,75cm each,that can guarantee full capacity and improve strength